background image

4

Safety Warnings

• Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety  

instructions. The user will be responsible for any loss or damage caused by improper use.

• Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and 

pads originally supplied by the manufacturer are in proper place and in serviceable condition; That the braking system is functioning 

properly; That any and all axle guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in serviceable 

condition; That tires are in good condition, inflated properly, and have sufficient tread remaining; The area that the product is to be 

operated should be safe and suitable for safe operation.

• Components shall be maintained and repaired in accordance with the manufacturer's specifications and using only the manufacturer's 

authorized replacement parts with installation performed by dealers or other skilled persons.

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zing) or rechargeable batteries.

• This product should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction (IEC 60335-1/A2:2006).

• Unsupervised children should not play with the product (IEC 60335-1/A2:2006).

• Adult supervision is required.

• The rider should not exceed 132 lb.

• Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may cause 

uncontrolled operator/passenger actions or reactions.

• Never use near motor vehicles.

• Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop.

• Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.

• Avoid riding around flammable gas, steam, liquid, or dust that could cause fire.

• Operators shall adhere to all of the manufacturer’s recommendations and instructions, as well as comply with all laws and ordinances: 

Units without headlights shall be operated only with adequate daylight conditions of visibility, and; Owners shall be encouraged to highlight 

(for conspicuity) using lighting, reflectors, and for low-riding units, signal flags on flexible poles.

• Persons with the following conditions shall be cautioned not to operate: Those with heart conditions; Pregnant women; Persons with head, 

back, or neck ailments, or prior surgeries to those areas of the body; and persons with any mental or physical conditions that may make 

them susceptible to injury or impair their physical dexterity or mental capabilities to recognize, understand, and perform all of the safety 

instructions and to be able to assume the hazards inherent in unit use.

• Do not ride at night.

• Do not ride after drinking or taking prescription medication.

• Do not carry items when riding.

• Never operate the product barefooted. 

• Always wear shoes and keep shoelaces tied.

• Make sure your feet are always placed securely on the deck.

• Operators always shall use appropriate protective clothing, including but not limited to a helmet, with appropriate certification, and any 

other equipment recommended by the manufacturer: Always wear protective equipment such as helmet, knee pads, and elbow pads.

• Always give way to pedestrians.

• Be alert to things in front and far away from you.

• Do not allow distractions when riding, such as answering the phone or engaging in any other activities.

• The product cannot be ridden by more than one person.

• When you ride the product along with other riders, always keep a safe distance to avoid a collision.

• When turning, be sure to maintain your balance.

• Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.

• The brake may become hot while operating, do not touch the brake with your bare skin.

• Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive 

Summary of Contents for JBYOD-3KIK





























Reviews: