background image

Safety Warnings

• Before use, please read the user manual and safety warnings carefully, and make sure 

you understand and accept all the safety instructions. The user will be responsible for 

any loss or damage caused by improper use.

• Before each cycle of operation, the operator shall perform the preoperation checks 

specified by the manufacturer: That all guards and pads originally supplied by the 

manufacturer are in proper place and in serviceable condition; That the braking system is 

functioning properly; That any and all axle guards, chain guards, or other covers or guards 

supplied by the manufacturer are in place and in serviceable condition; That tires are in 

good condition, inflated properly, and have sufficient tread remaining; The area that the 

product is to be operated should be safe and suitable for safe operation.

• Components shall be maintained and repaired in accordance with the manufacturer’s 

specifications and using only the manufacturer’s authorized replacement parts with 

installation performed by dealers or other skilled persons.

• Warning against recharging non-rechargeable batteries.

• Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact 

with moving parts, wheels, or drive train, while the motor is running.

• This product should not be used by children or persons with reduced physical, sensory 

or mental capabilities, or lack of experience and knowledge, unless they have been given 

supervision or instruction (IEC 60335-1/A2:2006).

• Unsupervised children should not play with the product (IEC 60335-1/A2:2006).

• Adult supervision is required.

• The rider should not exceed 220 lb.

• Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may 

cause loss of control, or may cause uncontrolled operator/passenger actions or reactions.

• Never use near motor vehicles.

• Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may 

suddenly stop.

• Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet 

weather impairs traction, braking, and visibility.

• Avoid riding around flammable gas, steam, liquid, or dust that could cause fire.

• Operators shall adhere to all of the manufacturer’s recommendations and 

instructions, as well as comply with all laws and ordinances: Units without headlights 

shall be operated only with adequate daylight conditions of visibility, and; Owners shall 

be encouraged to highlight (for conspicuity) using lighting, reflectors, and for low-riding 

units, signal flags on flexible poles.

• Persons with the following conditions shall be cautioned not to operate: Those with 

heart conditions; Pregnant women; Persons with head, back, or neck ailments, or prior 

surgeries to those areas of the body; and persons with any mental or physical conditions 

that may make them susceptible to injury or impair their physical dexterity or mental 

capabilities to recognize, understand, and perform all of the safety instructions and to 

be able to assume the hazards inherent in unit use.

• Do not ride at night.

• Do not ride after drinking or taking prescription medication.

• Do not carry items when riding.

• Never operate the product barefooted. 

• Always wear shoes and keep shoelaces tied.

• Make sure your feet are always placed securely on the deck.

• Operators always shall use appropriate protective clothing, including but not

limited to a helmet, with appropriate certification, and any other equipment

recommended by the manufacturer: Always wear protective equipment such as helmet, 

knee pads, and elbow pads.

• Always give way to pedestrians.

• Be alert to things in front and far away from you.

• Do not allow distractions when riding, such as answering the phone or engaging in any 

other activities.

• The product cannot be ridden by more than one person.

• When you ride the product along with other riders, always keep a safe distance to avoid 

a collision.

• When turning, be sure to maintain your balance.

• Riding with improperly adjusted brakes is dangerous and can result in serious

injury or death.

• The brake may become hot while operating, do not touch the brake with your bare skin.

• Applying brakes too hard or too suddenly can lock up a wheel, which could 

cause you to lose control and fall. Sudden or excessive application of the brake 

may result in injury or death.

• If the brake loosens, please adjust with the hexagon wrench, or please contact Jetson 

Customer Support.

• Replace worn or broken parts immediately.

• Check whether all safety labels are in place and understood before riding.

• The owner shall allow the use and operation of the unit after a demonstration 

that such operators can understand and operate all components of the unit 

before use.

• Do not ride without proper training. Do not ride at high speeds, on uneven 

terrain, or on slopes. Do not perform stunts or turn abruptly.

• Recommended for indoor use.

• Prolonged exposure to UV rays, rain and the elements may damage the enclosure 

materials, store indoors when not in use.

California Proposition 65

      

WARNING

:

  

This product can expose you to a chemical such as Cadmium that is known to 

the state of California to cause cancer or birth defects or other reproductive harm. 

For more information go to www.p65warnings.ca.gov/product

NOTICE OF COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the  following two conditions: 
(1) this device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation. 

Warning:

 Changes or modifications to this unit not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.

NOTE:

 This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against 
harmful interference in a residential installation.  This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in a 
particular installation.  If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

Summary of Contents for JPLSM-BLK








Reviews:

Related manuals for JPLSM-BLK