Jetson V6-XL, Manual

7

CHARGING THE BATTERY

PAD SENSORS

There are four sensors under the pad. Never remove the pad or you will revoke 

the warranty. When the V6-XL is turned on and you step on, it will automatically 

adjust to the balance mode. Please don’t step outside the outlined pad. 

Please do not put items on the pad; that will prevent the V6-XL from switching 

off, which could cause a collision. The device will not move without putting 

pressure on at least one sensor.

CHARGING BATTERY

Your V6-XL comes with a rechargeable lithium ion battery. Always use the 

provided charger only. Before your first ride you must fully charge the             

V6-XL - charge for 4 hours. For every ride after, charge your V6-XL until it is fully 

charged, and NOT LONGER. Do not leave any chargers plugged in overnight, 

or leave it plugged in past the charge time.

1. Plug one end of the power cord into a grounded AC outlet and the other 

into the V6-XL’s Charging Port. The red charging light on the charger unit will 

turn on.

2. The red light will turn green once fully charged. Recharge the V6-XL after 

each use.

(Please note: Always plug the charger into the wall first before the device. If the 

wall outlet doesn’t have power and you plug the charger into the device first, it 

will light green, even if the battery is not full. So always plug into the wall first to 

make sure there is power.) 

THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE 

CHARGER:

Charging Light Red 

battery is charging.

Charging Light Green 

charging is complete. 

Stop riding immediately if the V6-XL displays low power. 

Don’t use the hoverboard if the battery emits strange odors, overheats, or 

begins leaking. If the battery does leak, do not touch any leaking materials, as 

the battery contains dangerous substances. Do not open the battery and do 
not insert anything into the battery.

Only use the provided charger for the V6-XL. Do not charge the battery if it has 
over-discharged. It should be discarded for your safety.