Management and Monitoring
25
Figure 3-11
Two Servers to Three
JetStor
/ Two SAS Zones
TIP:
Only the
JetStor
system on top layer can set SAS zones, the
JetStor
systems cascaded to it is only for storage expansion.
3.3.
Device Slot
The
Device Slot
tab provides to show the disk drive information and indicator control for the
disk drives installed in slots.
Disk Drive information
: Show each disk drive’s vendor, model name and serial number.
Besides, if the disk drive is healthy, the device slot status will be blank; if the disk drive
has any problem, the device slot status will show fault indicator _
Fault
_ under the disk
device slot.
ID LED
: Users can turn on the disk drive ID LED for maintenance, click the ID LED to turn
on the ID LED and click again to turn it off.
