22
13. Technical information, warranty, service, periodical safety
technical checks in the given period
13.1 Basic technical information
Power supply:
100 to 240 VAC / 50 - 60 Hz
IEC protection class:
II
Type of device:
With an applied part of the BF type
Type of power supply source:
DA12-050EU-M, manufacturer EMERSON
Input of power supply:
100-240 VAC / 50 - 60 Hz
Output of power supply:
5VDC, max. 2.0 A
Consumption of power supply:
max. 12 VA
Voltage of plasma discharge generator:
0,8
–
7 kV
Intensity of plasma discharge: 0,3
–
1,8 W
P
atient´s grounding functioning
detection: SCS system
Automatic switching off high voltage at
the tip:
after 20s
Accelerated decrease of voltage at the tip
to zero after switching off:
after 1 s
Size:
245 mm * 45 mm
Weight:
approx. 350 g
Range of relative air humidity:
30% - 75%
Range of environment temperature:
+10 to +40
o
C
Range of atmospheric pressure:
50,0 kPa
–
106,0 kPa
Working environment
the device should not be used close to flammable
anesthetic compounds with air or flammable
anesthetics mixed with oxygen or nitrous oxide
Protection class:
IP20
Storage:
Store in the original package indoors, in a dry
place with maximal temperature +5°C –
40°C
and relative humidity of air up to 80%.
Transportation:
Transport in the original package in a sheltered
transportation space with maximal temperature
+5°C –
40°C and relative humidity of air up to
10- 100% without condensation. Range of
atmospheric pressure: 50kPa to 106 kPa.
Any kind of modification the medical device Jett Plasma Lift Medical is strictly
forbidden!
