INSTALLATION INSTRUCTIONS | JETTA CORPORATION
PAGE | 7
16. Leave the bathtub in this position for
at least 24 hours before use.
14. Apply provided lubricant halfway up
the tailpiece and position the bathtub
and tailpiece in line with the Drain Kit.
15. With caution, slowly insert the bath-
tub tailpiece into the Drain Kit.
17. Water test the bathtub for leaks.
If unit is within the limited factory warranty, contact Jetta Corporation at (800)
288-7771 with your purchasing information on hand so we may serve you better.
Visit WWW.JETTACORP.COM/FAQs for additional troubleshooting tips.
© 201
9
Jetta Corporation. All rights reserved. REV
04/2019
1(800) 288-7771
