During the installation, follow the instructions below:
Always comply with the connection conditions and technical data.
Observe the standards for electrical installation, such as conductor cross-
section and protective conductor and grounding connections.
Do not touch electronic components or contacts (electrostatic discharge can
destroy components).
1.2
Warning symbols
The safety instructions describe the following hazard classes.
The hazard class describes the risk if the safety instructions are not fol-
lowed.
Warning symbols
Hazard class according to
ANSI Z 535
Consequences of non-observance
Danger!
DANGER indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
Warning!
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
Caution!
CAUTION indicates a hazardous situation which, if
not avoided, will result in minor or moderate injury.
Danger from electrical volt-
age!
Death or serious injury will result if the appropriate
precautions are not taken.
Caution hot surface!
CAUTION indicates a hazardous situation which, if
not avoided, will result in minor or moderate injury.
Table 1.1 Explanation of warning symbols
1.3
Intended use
The JM-3000 servo amplifiers are components designed for installation in
industrial and commercial plants and machines. Installation is only permit-
ted in stationary equipment.
The JM-3000 multi-axis motion system consists of at least one supply unit
and at least one servo amplifier. In motor operating mode, the supply unit
draws power from the supply network and provides it to the connected
servo amplifiers via the DC link.
Safety
12
Jetter AG
