When the servo amplifier is installed in a machine,
commissioning (i.e.
commencement of DES intended use) is prohibited until it has been de-
termined that the machine complies with Machinery Directive 2006/42/EC.
Commissioning, i.e. the commencement of the intended use is only permit-
ted if the EMC Directive (2004/108/EC) is complied with.
CAUtIoN!
According to EN ISO 13849-2 the control cabinet must have a degree of protection
of IP54 or higher when using the safety function STO (Safe Torque OFF).
The JM-3000 servo amplifiers comply with the Machinery
Directive
2006/42/EC. They have been tested and certified according to ap
-
plicable standards (see Declaration of Conformity).
1.4
Usage other than intended
The servo amplifiers must not be used outside a control cabinet.
They must also not be used for other purposes, e.g. for generating higher-
frequency on-board networks from a DC battery.
And they must not be operated on supply units from other manufacturers.
Jetter AG
13
JetMove 3000
Safety
