27
*This item may or may not show up, depending on different configuration.
Parity
The default setting is: [None].
*This item may or may not show up, depending on different configuration.
Stop Bits
The default setting is: [1].
*This item may or may not show up, depending on different configuration.
►
Network Stack Configuration
Press [Enter] to go to
‘
Network Stack
’
screen to make further settings.
Network Stack
Use this item to enable or disable UEFI Network Stack.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Ipv4 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv4 PXE Boot Support. When set as [Disabled], IPv4 PXE
boot support will not be created.
Ipv4 HTTP Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv4 HTTP Boot Support. When set as [Disabled], Ipv4
HTTP boot support will not be available.
Ipv6 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable IPv6 PXE Boot Support. When set as [Disabled], IPv6 PXE
boot support will not be available.
Ipv6 HTTP Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv6 HTTP Boot Support. When set as [Disabled], Ipv6
HTTP boot support will not be available.
PXE boot wait time
Use this item to set wait time to press [ESC] key to abort the PXE boot.
Media Detect Count
Use this item to set number of times presence of media will be checked.
►
CSM Configuration
Press [Enter] to make settings for the following sub-items:
Option ROM execution
Network
This option controls the execution of UEFI and Legacy PXE OpROM.
The optional settings are: [Do not launch]; [Legacy].
Storage
This option controls the execution of UEFI and Legacy Storage OpROM.
The optional settings are: [Do not launch]; [UEFI]; [Legacy].
Other PCI devices
This item is for user to determine OpROM execution policy for devices other than
Network, storage or video.
The optional settings are: [Do not launch]; [UEFI]; [Legacy].
►
USB Configuration
Press [Enter] to make settings for the following sub-items:
