14
2-4 Hardware Installation
Remove the screws that lock the back cover to the system from the back side before
hardware installation procedures (refer to 2-2).
2-4-1 To Install MSATA Card
1.
Place the Panel PC with this side up
upon a flat operation platform. See to it
to put a protective cushion under the
panel to prevent possible damage.
2.
Remove the screws that lock the chassis
on the back side of the system (refer to
2-2).
3.
Locate the full-size MSATA slot on the
board.
4.
Remove the marked screw and use it to
lock MSATA card to the slot in later
installation.