45
PCH-IO Configuration
PCI Express Configuration
Press [Enter] to make setting for the following item:
Peer Memery Write Enable
Use this item to enable or disable Peer Memory Write.
The optional settings are: [Disable]; [Enabled].
SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Configuration
SATA Controller
Use this item to enable or disable SATA device.
The optional settings are: [Disabled]; [Enabled].
SATA Mode Selection
Use this item to determine how SATA controller(s) operate.
The default setting is: [AHCI].
SATA Port
SATA Port
The optional settings are: [Disabled]; [Enabled]
Hot Plug
Use this item to designate this port as Hot Pluggable.
The optional settings are: [Disabled]; [Enabled].
M.2
M.2
The optional settings are: [Disabled]; [Enabled].
HD-Audio Support
Use this item to control Detection of the HD-Audio device.
The optional settings: [Disabled]; [Enabled].
System State after Power Failure
Use this item to specify what state to go to when power re-applied after a power
failure (G3 state).
The optional settings: [Always On]; [Always Off]; [Former State].
