34
The optional settings are: [Disabled]; [Enabled].
Onboard Lan2 Controller
Use this item to control the PCI Express Root Port.
The optional settings are: [Disabled]; [Enabled].
Wake on LAN Enable
Use this item to enable or disable integrated LAN to wake the system.
The optional settings are: [Disabled]; [Enabled].
System State After Power Failure
Use this item to select what state to go to when power is re-applied after a power
failure (G3 state).
The optional settings are: [Always On]; [Always Off]; [Former State].
3-9 Security Menu
Security menu allow users to change administrator password and user password
settings.
Administrator Password
If there is no password present on system, please press [Enter] to create new
administrator password. If password is present on system, please press [Enter] to
verify old password then to clear/change password. Press again to confirm the new
administrator password.
User Password
If there is no password present on system, please press [Enter] to create new user
password. If password is present on system, please press [Enter] to verify old
password then to clear/change password. Press again to confirm the new
administrator password.
Secure Boot
Press [Enter] to make customized secure settings:
Secure Boot
Secure Boot feature is active if Secure Boot is enabled, Platform Key (PK) is
enrolled and the system is in User mode. The mode change requires platform
reset.
The optional settings are: [Disabled]; [Enabled].