background image

 

 
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     

 
 
 

39 

Save Changes and Reset 

This item allows user to reset the system after saving the changes. 

Discard Changes and Reset 

This item allows user to reset the system without saving any changes. 

Default Options 
Restore Defaults 

Use this item to restore /load default values for all the setup options. 

Save as User Defaults 

Use this item to save the changes done so far as user defaults. 

Restore User Defaults 

Use this item to restore the user defaults to all the setup options. 

Boot Override 

 

3-12 MEBx 

For MM10-Q670 

 

Intel(R) ME Password 

Use this item to MEBx Login 

 

Summary of Contents for MM10-H6100












































Reviews: