25
PACKAGE_POWER_SKU_MSR). Other SKUs:This value must be between Min
Power Limit and TDP Limit. If value is 0, BIOS will program TDP value
Power Limit 1 Time Window
Use this item to power Limit 1 Time Window value in seconds. The value may vary
from 0 to 128. 0=default value (28 sec for Mobile and 8 sec for desktop). Defines time
Window which TDP value should be maintained.
The optional settings: [0]; [1]; [2]; [3] ; [4] ; [5] ; [6] ; [7] ; [8] ; [10] ; [12] ; [14] ; [16] ;
[20] ; [24] ; [28] ; [32] ; [40] ; [48] ; [56] ; [64] ; [80] ; [96] ; [112] ; [128]
Power Limit 2 Override
Use this item to enabled/disable power Limit 2 override. If this option is disabled,
BIOS will program the default values for Power Limit 2.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
Power Limit 2
Use this item to power Limit 2 vallue in Milli watts. BIOS will round to the nearest 1/8W
when programming. If the value is 0, BIOS will program this value as 1.25*TDP. For
12.50W, enter 12500. Processor applies control policies such that the package power
does not exceed this limit.
►
Intel(R) Time Coordinated Computing
Use this item to Intek(R) Time Coordinated Computing (Intel(R) TCC) options
Press [Enter] to make settings for the following sub-items:
Intel(R) TCC Mode
Use this item to enable or disable Intel(R) TCC mode. when enabled, this will
modify system settings to improve real-time performance. The full list of settings
and their current state are displayed below when Intel(R) TCC mode is enabled
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in the following items:
