34
AMT Support
Use this item to enable or disable AMT support. When disabled AMT BIOS
Features are no longer supported and user is no longer able to access MEBx
Setup.
*Note
:
This option does not disable Manageability Features in FW.
The optional settings: [Disabled]; [Enabled].
ASF Support
Use this item to enable or disable Alert Standard Format support.
The optional settings: [Disabled]; [Enabled].
*When set as [Enabled], user can make further settings in ‘
ASF Configuration
’ &
‘
Secure Erase Configuration
’.
USB Provisioning of AMT
Use this item to enable or disable AMT USB Provisioning.
The optional settings: [Disabled]; [Enabled].
CIRA Configuration
This item is for user to configure Remote Assistance Process parameters.
Press [Enter] to make settings for in the following sub-item:
Activate Remote Assistance Process
Use this item to trigger CIRA boot.
*Note
: Network Access must be activated first from MEBx Setup.
The optional settings: [Disabled]; [Enabled].
*When set as [Enabled], user can make further settings in ‘
CIRA Timeout
’.
CIRA Timeout
OEM defined timeout for MPS connection to be established.
The setting range is from [0] to [255].
[0]: use the default timeout value of 60 seconds;
[255]: MEBx waits until the connection succeeds.
ASF Configuration
This item is for user to configure Alert Standard Format parameters.
Press [Enter] to make settings for in the following sub-items:
PET Progress