53
The optional settings are: [Auto]; [Force X1]; [Force X2]; [Force X4]; [Force X 8].
Detect Non-Compliance Device
This item is for user to detect Non-Compliance PCI Express Device in PEG.
The optional settings: [Disabled]; [Enabled].
►
PCH-IO Configuration
Press [Enter] to make settings for the following sub-items:
PCH-IO Configuration
HD Audio
Use this item to control Detection of the HD-Audio device.
The optional settings: [Disabled]; [Enabled].
[
Disabled
]: HDA will be unconditionally disabled.
[
Enabled
]: HAD will be unconditionally enabled.
Onboard Lan1 Controller
Use this item to enable or disable corresponding onboard NIC device or controller.
The optional settings: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
Wake on LAN Enable
Use this item to enable or disable integrated LAN to wake the system.
The optional settings: [Enabled]; [Disabled].
Onboard Lan2 Controller
Use this item to control the PCI Express Root Port.
The optional settings: [Disabled]; [Enabled].
M2M Slot
Use this item to control the PCI Express Root Port.
The optional settings: [Disabled]; [Enabled].
M2E Slot
Use this item to control the PCI Express Root Port.
The optional settings: [Disabled]; [Enabled].
