background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

36 

Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration 
Data (ESCD) when you exit Setup if you have installed a new add-on and the system 
reconfiguration has caused such a serious conflict that the operating system can not boot.  
The settings are: Enabled and Disabled. 
Resource Controlled By 
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot 
and Plug and Play compatible devices.  However, this capability means absolutely nothing 
unless you are using a Plug and Play operating system such as Windows

95/98.  If you set 

this field to “manual” choose specific resources by going into each of the sub menu that 
follows this field (a sub menu is preceded by a “>”). 
The settings are: Auto(ESCD), Manual. 

IRQ Resources 
When resources are controlled manually, assign each system interrupt a type, depending on 
the type of device using the interrupt. 
Please refer to section 3-9-1 
PCI/VGA Palette Snoop 
Leave this field at Disabled.  The settings are Enabled, Disabled. 

3-9-1   IRQ Resources 

 

CMOS Setup Utility – Copyright(C) 1984-2001 Award Software 

IRQ Resources 

 

Item Help 

 

   IRQ-3  assigned to              PCI Device 

   IRQ-4  assigned to              PCI Device 

   IRQ-5  assigned to              PCI Device 

   IRQ-7  assigned to              PCI Device 

   IRQ-9  assigned to              PCI Device 

   IRQ-10 assigned to              PCI Device 

   IRQ-11 assigned to              PCI Device 

   IRQ-14 assigned to              PCI Device 

   IRQ-15 assigned to              PCI Device 

      

 

 

 
  Menu Level >> 
 
   

↑↓→←

 Move Enter:Select  +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

F5:Previous Values    F6:Optimized Defaults    F7:Standard Defaults 

 
 

3-10  PC Health Status 

 
This section shows the Status of you CPU, Fan, Warning for overall system status.  This is 
only available if there is Hardware Monitor onboard. 

CMOS Setup Utility – Copyright(C) 1984-2001 Award Software 

PC Health Status 

   Shutdown Temperature            Disabled 

 

Item Help 

Summary of Contents for S446R2A























































Reviews: