background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

20 

3-3  The Main Menu 

Once you enter Award

 BIOS CMOS Setup Utility, the Main Menu (Figure 3-1) will appear 

on the screen.  The Main Menu allows you to select from fourteen setup functions and two 
exit choices.  Use arrow keys to select among the items and press <Enter> to accept or enter 
the sub-menu. 

CMOS Setup Utility – Copyright(C) 1984-2004 Award Software 

  Standard CMOS Features 

  Advanced BIOS Features  

  Advanced Chipset Features  

  Integrated Peripherals 

  Power Management Setup 

  PnP/PCI Configurations  

  PC Health Status 

  Miscellaneous Control 

  Load optimized Defaults 

  Load Standard Defaults 

  Set Supervisor Password 

  Set User Password  

  Save & Exit Setup 

  Exit Without Saving 

  Esc : Quit                            

↑↓→←

 : Select Item       

  F10 : Save & Exit Setup           

Time, Date, Hard Disk Type...      

Figure 3-1 

 

Standard CMOS Features 

Use this Menu for basic system configurations. 

Advanced BIOS Features 

Use this menu to set the Advanced Features available on your system. 

Advanced Chipset Features 

Use this menu to change the values in the chipset registers and optimize your system’s 
performance. 

Integrated Peripherals 

Use this menu to specify your settings for integrated peripherals. 

Power Management Setup 

Use this menu to specify your settings for power management. 

PnP/PCI configurations 

This entry appears if your system supports PnP/PCI. 

PC Health Status 

This entry shows your PC health status.   

Miscellaneous Control 

Use this menu to specify your settings for Miscellaneous control. 

Summary of Contents for V2MDMP

















































Reviews: