Baby Lock Jewel Service Manual
© Baby Lock, all rights reserved
4
About the Baby Lock Jewel Quilting Machine
The Baby Lock Jewel Quilting Machine utilizes high-tech electronics and an
innovative touch-pad user interface to offer greater functionality and ease of operation
to home quilters than ever before conceived in the quilting industry. The Baby Lock
Jewel Quilting Machine is a high quality machine that incorporates very robust design
features and is very easy to service.
The Baby Lock Jewel Quilting Machine is constructed following a specific sequence
of operations - similar to the construction of a house. Walls cannot be erected until
the foundation is in place. Similarly, this service manual has been written with an
adjustment logic that is driven by the construction processes used to create the
machine. If the service technician carefully follows the adjustment steps in the order
presented, a fine running sewing machine is possible each and every time.
About the Manual
The purpose of this service manual is to help the technician complete a repair on a
machine accurately and quickly. The manual is complete with photographs and
explanations that we hope will aid you in your repair efforts. In addition to the
teaching aids found herein, you will also find all of the tools listed that are necessary
for adjustments. If you need help in locating these tools for purchase, please contact
the company.
Service Manual General Rule
•
Adjustments shown in the manual should only be made if a setting deviates from the
tolerance specified in the manual.
•
Adjustments should be made only in the logical sequence shown and described in the
manual.
•
Safety must be considered when working on any machine. Safety warnings are
included throughout this manual where appropriate, but these warnings do not
address all possible safety concerns that might confront the service technician.
•
When working on or near any live electrical assemblies, the power cable must be
removed from the machine.
•
We urge you to observe the cautions in the manual.
•
Please note that the hand wheel must always be turned in the direction of normal
rotation unless otherwise instructed. This is especially true when making the loop lift
timing and needle height adjustment.