Baby Lock Jewel Service Manual
© Baby Lock, all rights reserved
41
Press Selection
Type
Function
Diagnostic Mode
Allows an authorized representative to run
Diagnostics on the Jewel
Set Up
Select
Alarm Mode
Allows the user to set overspeed alarm
Overspeed – alarm beeps to indicate that the
machine is no longer in sewing regulation mode
because the machine is being moved too fast.
Press Select to toggle between Y (the alarm is on)
and N (the alarm is off)
Set on Y (the alarm is on)
Exit Menu
Press
Select
to exit Alarm mode and returns to
the Set Up menu
My Speed
Press Select
Allows the user to select their preferred speed
which will become the default speed each time the
machine is turned on. Press the up/down arrows
to select the speed. NOTE: the Jewel speed is
1500 SPM. If you set the new speed to 50%, that
would be 750 SPM.
The speed easy to over ride
when you are in Manual Mode by using Speed Up
or Speed Down on the handlebars.
Set the speed for 70% =1050 SPM
Select
Returns to Set Up menu
Light Mode
Press Select
Used to selectively turn on/off two LED light
clusters nearest to the machine on each side of
the handlebars.
Use the up/down arrows to the light positions
which correspond to the bulb position on the
handlebar.
Press Select to turn a bulb off/on.
An asterisk indicates the bulb is on. The small
circle indicates the bulb is off.
Exit menu
Press Select
to exit Light Mode and return to the
Set Up menu
Counters
Press Select
Counts the total number of stitches on the
machine over the life of the machine and during a
time period set by the user.
L (Lifetime) Stitch count over the life of the
machine – can not be reset
T (Trip) Can be used to count the number of
stitches over a specific time frame defined by the
user. To reset the trip stitch, use the up/down
arrow keys to point to
Reset
and
press Select.