JFA Electronicos K600, Instruction Manual

K600 REMOTE CONTROL - INSTRUCTION MANUAL

DESCRIPTION

The  K600  allows  you  to  control  by  distance¹  the  main  functions  of  the 
"player" and change music, folder, volume, pause, play and power.

OPERATION

Transmitter unit: Whenever an o key is pressed, an RF (radio frequency) 
signal, will be transmitted to the receiving unit.

Receptor unit: The "led action" will light up indicating the presence of the 
received signal, and will transmit in IR (infra red) the code corresponding 
to the key pressed.
The receiver can operate with two transmitters, to do this, per form steps 
1 and 2 of the item “CODING THE CONTROL” for the new transmitter.

IMPORTANTE

The control panel will not work if the coding procedure is not carried out.
To avoid interference, install the receiver in a location where the antennais 
close to the panel and at least 50 cm away from the car alarm receiver.

¹For a longer range, install the equipment in a location where the antenna is free and 
the most exposed as possible, the distance achieved is 600 meters in open area.