background image

REDLINE REMOTE CONTROL - INSTRUCTION MANUAL

PRESENTATION

The REDLINE allows you to control by distance¹ the main functions of the 
"player" and change music, folder, volume, pause, play and power.

FUNCTIONING

Transmitter unit: Each time a key is pressed, a radio frequency (RF) signal 
is transmitted to the receiving unit.
Receiving unit: it will turn on the "led action" indicating the presence of a 
received  signal,  and  controls  the  player  through  the  P2  plug  of  the  W/R 
interface of the PIONNER brand models that have this input and PLAYERS 
with resistive interface.

IMPORTANT REMARKS

• To avoid interference, install the receiving unit at a distance of at least 1 
meter from the alarm center or electronic injection module.
• For a greater range, the antenna should be kept stretched and in a place 
that is visual and distant from the car store.
• Check the intensity of the light on the led of the transmitter unit. If it is 
weak or does not turn on, replace the battery.

¹For a longer range, install the equipment in a location where the antenna is free and 
the most exposed as possible, the distance achieved is 1200 meters in open area.

REMOTE CONTROL

REDLINE

Summary of Contents for REDLINE







Reviews: