----3D Printer User Guide
13
Press “LEVELING”, the printer head to back to home automatically, then press the 4 points to make leveling, as below
showing:
Please Note: You may find it helpful to refer to the video demonstrating platform leveling, that is found in the
included USB stick.
4.4 Filament loading
Click [ PREHEAT ] to enter “Preheat menu”->select the relative filament to preheat. Here, we are using PLA as an
example.
Press
“
point 1
”
,
the head move
to right back
Press
“
point 4
”
,
the head move
to right front
Press
“
point 3
”
,
the head move
to left front
Press
“
point
2
”
, the head
move to left
back
front