----3D Printer User Guide
15
4.5 Trial printing
1)
Model loading: Select and load the 3d file you want to print, or drag it directly into the software window.
2) G-code save: After slicing of the 3d file is finished, click the “Save to File” button in the lower right corner to save
the file onto the USB stick, with an appropriate file name.
2)
Insert the USB stick into the USB port on the A8S, and then click "PRINT" on the Main Menu , and then select the
3D
Gcode file. Click "START" and the A8S will being to preheat the nozzle and printing platform. When the
temperature of then nozzle reaches the
temperature set in the slicer software, the 3D printing of the model will
begin.
Click
“
Open File
”
Save the file