ENGLISH
20
size: A6 (105x148mm)
IMPORTANT SAFETY INSTRUCTIONS
• The switch
STANDBY/FM
does not separate the device from the mains.
In order to separate the device from the power supply, unplug the power
cord.
• Avoid damages to the power cord that may be caused by kinks or contact
with sharp corners.
• Make sure, the device, including power cord and power plug are not
exposed to hot surfaces.
• Only unplug from the power outlet by the plug itself. Do not pull on the
cord.
• Disconnect the power plug when the device is not in use, in case of
malfunctions and prior to each cleaning.
• Unplug the power cord during lightning storms and prolonged absence in
order to protect the electronics against overvoltage and damage.
• If the power cord or the casing of the device is damaged or if the device
is dropped, the device may not be used before it is examined by a
professional electrician.
• A damaged power cord may only be replaced by the manufacturer or a
workshop commissioned by the manufacturer or by a similarly qualified
person in order to avoid hazards.
• Protect the power cord and the housing from damage.
Batteries
•
Caution:
There is danger of explosion from improper replacement of
the batteries. Replace batteries only with the same or equivalent type of
battery.
• Always change the entire battery pack. Do not mix old and new batteries,
or batteries with different charge state.
JGC-LSR-4030-IM-DE-EN-V1.indb 20
09/03/2010 11:16 AM