ENGLISH
31
PREPARATION
Delivery contents
•
1x playback device with power cord and with power plug
•
1x remote control
•
1x Ø3.5 mm stereo cable
•
2x 1.5V LR03/AAA batteries for the
remote control
•
1x operating instructions
Unpacking the device
•
Take the device and accessories carefully out of the packaging. We recommend retaining the packaging for
storage purposes at a later date. If you choose to dispose of the packaging, then please do so according
to the applicable legal regulations. Should you have questions regarding disposal, please consult your local
authority.
•
Check the packaging contents for completeness and damages. Should the contents in the packaging not be
complete or be damaged, immediately contact your retail outlet.
Power Supply
•
Only connect the device to power supply with the same voltage indicated on the label. Connecting the device
to the wrong voltage can result in damages, thus rendering the guarantee invalid.
•
Connect the power plug to a suitable power outlet. Once the connection has been established, the device
switches automatically to stand-by mode.
•
In order to switch off the device completely, pull the power plug out of the power outlet.
Inserting / replacing the batteries
•
Push the battery compartment cover on the bottom of the remote control in the
direction of the arrow and remove the cover.
•
If necessary, remove the old batteries and insert two new batteries, type 1.5 V
LR03/AAA, into the battery recess.
•
When doing so, pay attention to the correct polarity (+/-) displayed in the
battery compartment. Slide on the battery compartment cover and click it into
place.
•
Remove the batteries from the battery compartment if you know that you will
not use the remote control for a longer period of time.
•
Read the safety instructions for using batteries (see chapter
Important Safety
Instructions
).
Fig.1
Instructions for remote control
•
Make sure that no objects are located between the infrared LED of the remote and the infrared sensor (1) on
the device.
•
Please note that direct sunlight or room lighting influences the correct function of the remote control. If the
remote control does not work properly, try to darken the area or reduce the distance between the device and
the remote control. If the problem persists, replace the batteries in the remote control.
•
The buttons on the remote correspond to their function with the buttons on the device. All main functions
can be performed with the remote control.
•
The following functions are carried out and explained with the remote control unless otherwise indicated.
JGC-MS-8110-IM-DE-EN-V2.indb 31
24/08/2009 4:51 PM