background image

ENGLISH

45

WARRANTY

Customer Info

Manufacturer’s Warranty

Our service partner requires proof of purchase, either as original receipt or cash receipt printed by 

the seller to perform warranty repairs. The serial number on the device must also be readable. We 
are unable to perform warranty services free of charge without proof of purchase. We recommend 

keeping the original packaging in order to ensure safe transport of the device in case of a warranty 

claim.

Warranty repairs may be performed exclusively by E2 Servicecenter GmbH or contractual partners 

authorised by it. Repairs performed by the customer or other shops void the warranty; a claim for 

cost reimbursement does not exist.

The warranty is void or does not cover:

  in case of improper use
  in case of mechanical damages to the device from outside forces
  in case of transportation damages
  for wear parts 
  in case of operating errors and misuse 
  when placing the device in wet rooms or outdoors
  in case of damages resulting from force, war, water, lightning, excess voltage, and other 

 

reasons not within the scope of 

JGC

’s responsibility.

  in case of excessive use, in particular in case of non-domestic use  
  in case of disregard of the user instructions and installation errors 
  if the device does not have a technical defect 
  for transport and travel costs as well as costs incurred by installing and uninstalling the device

The warranty does not include any subsequent liability on our part, in particular no liability for 

damages to the device itself or incurred by the loss of the device until the time of repair (e.g. 

travel costs, handling costs, etc.). However, this does not limit or exclude our statutory warranty, in 

particular pursuant to the Product Liability Act. Also 

JGC

 is not liable for indirect or subsequent loss 

of sound recordings (CD / DVD etc.) or similar material, and ancillary equipment of any kind (power 

supplies, speakers, etc.).

Any warranty services provided by us do not extend the warranty term of 3 years as of the date of 

purchase, also not in terms of possibly exchanged components.

We wish you much joy with your new device and hope that your next one will be another 

JGC

 product.

IMPOR

TANT DOCUMENT! PLEASE STORE FOR 3 YEARS WITH PROOF OF PURCHASE

JGC-MS-2305-IM-DE-EN-V2.indb   45

07/08/2009   5:09 PM

Summary of Contents for MS-2305














































Reviews: