background image

 

 

  User’s Manual

 

52 

 

 

The KGEC-6300 comes with a CD-ROM that contains all drivers and utilities that meet your needs.   

4.1 Follow the sequence below to install the drivers:   

 

 

Figure 5.1 win7 drivers 

Step 1 – Install Audio Driver   

Step 2 – Install Chipset Driver   

Step 3 – Install Graphic Driver   

Step 4 – Install LAN Driver   

Step 5 – Install ME Driver     

Please read instructions below for further detailed installations.     

4.2 Installation:   

Insert the STX-I952 CD-ROM into the CD-ROM drive. And install the drivers in turn.   

Step 1 – Install Graphic Driver   

 

      1. Double click on the Display folder and double click on the Setup.exe   

2. Follow the instructions that the window shows   

3. The system will help you install the driver automatically   

 

Step 2 – Install Audio Driver   

 

      1. Double click on the Audio folder and double click on the Setup.exe   

2. Follow the instructions that the window shows   

3. The system will help you install the driver automatically   

 

Step 3 –Install LAN Driver   

 

      1. Double click on the LAN folder and double click on the Setup.exe   

Summary of Contents for KGEC-6300

































































Reviews: