1
x7
2
x6
4
3
5
Attach the Rear Support & Side Supports
│
6
1. Fit the rear support onto the rear vehicle. And keep the longer end of the rear
support fit into the groove inside the rear bumper.
2. Tighten seven
Ø4x12 round head screws
to secure it with a screwdriver.
3. Fit the side support onto the one side of vehicle.
If the side support does not
seem to fit, change the other one and try again!
4. Tighten six
Ø4x12 round head screws
to secure it with a screwdriver.
5. Repeat for the other side.
Rear Bottom View