4
5
1
3
2
1
2
2
3
3
1
5
4
6
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Hole in the
front axle linkage
Turn the vehicle body on its side.
1. Slide a
Ø
10 washer
onto the
steering column
from the straight end.
2. Insert the
straight end of steering column
up through the
hole
at the front of
vehicle body from bottom side, and out through the
hole in the dash
.
3. Insert the
bent end of steering column
through the
hole in the front axle
linkage
.
4. Fit a
Ø
10 washer
onto the steering column.
5. Insert a
split pin
into the hole in the steering column, bend the ends of split pin
back using
a
long nose pliers
.
Attach the Steering Column
│
9
Turn the vehicle body on its side. Remove the
M5x22 machine screw
and
Ø5
nut
from the
R/C driver
with a screwdriver.
1. Attach the
R/C driver
to the
steering gear box
, and make it match with
steering gear box.
2. Insert the
straight end of steering column
up through the
hole in the R/C
diver, the hole in the steering gear box
from the bottom side, and out
through the
hole in the dash
.
3. Line up the
holes in the R/C driver
and the
hole in the steering column
,
tighten a
M5x22 machine screw
and
Ø5 nut
back in the same location with a
screwdriver.
4. Insert the
bent end of steering column
through the
hole in the front axle
linkage
.
5. Fit a
Ø
10 washer
to the steering column.
6. Insert a
split pin
into the hole in the steering column, bend the ends of split pin
back using
a
long nose pliers
.
Steering Gear Box
