1
2
3
4
9
5
6
7
8
9
x2
1. Slide the
gear box
onto the
rear axle
(Left Side)
.
“R” labeled gear box should be fit to
the “R” side of vehicle body; “L” labeled gear box should be fit to “L” side of vehicle body.
2. Slide the
driving wheel
onto the rear axle. And keep the
driving wheel
match with the
gear box
.
3. Slide the
Ø10 Washer
onto the
rear axle
.
4. Tight a
Ø10 Locknut
to the end of the
rear axle
with a spanner.
5. Slide the
gear box
onto the
rear axle
(Right Side)
.
“R” labeled gear box should be fit to the “R” side of vehicle body; “L” labeled
gear box should be fit to “L” side of vehicle body.
6. Slide the
driving wheel
onto the rear axle. And keep the
driving wheel
match with the
gear box
.
7. Slide the
Ø10 Washer
onto the
rear axle
.
8. Tight a
Ø10 Locknut
to the end of the
rear axle
with a spanner.
HINT: An extra spanner has
been provided to hold the Ø10 locknut on the other side of the rear alxe while tightening the
locknut on the other side.
9. Fit the
hubcap
to the wheel cover.
Attach the Rear Wheels
│
7
Rear axle
Driving wheels are more bigger than front wheels
Tools required: Spanner
