小牛电动
Niu Electric
- 30 -
Tightening bolts on the steering handle assembly
Torque value: 40-60 N·m
Front fork
Disassembling:
Remove the panel, front journal lid and front fender.
Remove the steering handle assembly.
Sequentially remove:
Gland nut, lock nut, bearing cover and
upper conical bearing
Remove the front fork.
Remove the lower conical bearing.
Remove tightening bolts from the front shock absorber.
Remove the front left and right shock absorber assemblies.
Tools:
Spanner for tightening bolts on the steering handle.
Dedicated bearing detacher.
Installation
Apply the lubrication grease to the lower conical bearing, and
make sure that the bearing rotates freely.
Then install the steering column.
Support the steering handle. Apply the lubrication grease to the upper conical bearing.
Make sure that it rotates freely.
Rotate the steering handle leftward and rightward to make the bearing be in tight contact with outer race
of the bearing.
Tools:
Tightening nut spanner.
Rotate the front fork leftward and rightward to make sure that its rotation is smooth without looseness.
Steps:
Install the front shock absorber assembly.
Install the steering handle assembly, front panel, front journal lid,
front wheel and front fender.
Torque value for
tightening bolts on the front shock absorber assembly: 37-44
N·m
Summary of Contents for N1S
Page 12: ...Niu Electric 9 Scooter body scooter body panel...
Page 101: ...Niu Electric 98...
