8
EN
working corners, sharp edges
etc. Avoid bouncing and
snagging the accessory.
Corners, sharp edges or
bouncing have a tendency to
snag the rotating accessory
and cause loss of control or
kickback.
e)
Do not attach a saw chain
woodcarving blade or toothed
saw blade.
Such blades
create frequent kickback and
loss of control.
Additional safety instructions
for grinding and cutting-off
operations
Safety Warnings Specific for
Grinding and Abrasive Cutting-
Off Operations:
a)
Use only wheel types that are
recommended for your power
tool and the specific guard
designed for the selected
wheel.
Wheels for which the
power tool was not designed
cannot be adequately guarded
and are unsafe.
b)
The grinding surface of
centre depressed wheels
must be mounted below the
plane of the guard lip.
An
improperly mounted wheel that
projects through the plane of the
guard lip cannot be adequately
protected.
c)
The guard must be securely
attached to the power tool
and positioned for maximum
safety, so the least amount of
wheel is exposed towards the
operator.
The guard helps to
protect the operator from broken
wheel fragments, accidental
contact with wheel and sparks
that could ignite clothing.
d)
Wheels must be used
only for recommended
applications. For example:
do not grind with the side of
cut-off wheel.
Abrasive cut-
off wheels are intended for
peripheral grinding, side forces
applied to these wheels may
cause them to shatter.
e)
Always use undamaged
wheel flanges that are of
correct size and shape for
your selected wheel.
Proper
wheel flanges support the wheel
thus reducing the possibility of
wheel breakage. Flanges for
cut-off wheels may be different
from grinding wheel flanges.
f)
Do not use worn down
wheels from larger power
tools.
Wheel intended for larger
power tool is not suitable for the
higher speed of a smaller tool
and may burst.
Additional safety instructions
