4
Product Assemble
Step 1: Install the pedestal (pls use screw size M6 X45)
Take out the pedestal,cross-install the notch (like the picture 1), wood will be 90 degrees, vertical and stable.
Step 2: Install longer wooden legs
Align the holes in the cross nut with the holes in the pedestal ( like the picture 3) and insert the M6*65 screws
into the holes one by one, then fix the screws one by one with small hexagon (like the picture 4). The final effect
is shown in the picture 5.
Note: The legs with the holes in the side must be placed on the front .Otherwise Step 3 can't be installed.
1
2
3
4
5
