6
290148-GB(V3)
www.jilong.com
Before installing the heater, make sure that the pool frame is
assembled and filled with water then follow the instructions step by
step.
1.Use the hose provided to connect inlet port of the Heater to outlet
port of the Filter Pump, and then screw them tightly. (See the Fig. 1)
2.Connect inlet port of the Filter Pump to the lower outlet port of the
pool, and then screw them tightly. (See the Fig. 2)
1.5 Installation & Operation
3.Connect outlet port of Heater to the upper inlet port of the pool
then screw them tightly. (See the Fig. 3)