ZBI-13-GB(V1)
www.jilong.com
www.jilong.com
ZBI-13-GB(V1)
14
15
REPAIRS
Little holes or puncture can be repaired with the repair kit come along with the boat.
1. Find the leak.
2. Thoroughly clean the area surrounding the leak to remove any dirt or grime.
3. Cut a piece of repair material in round shape, which should be larger than the damaged
area.
4. Using a piece of the repair kit, trace outline of the patch lightly.
5. Apply adhesive to the underneath side of the patch and around the area to be repaired.
Coat the affected are lightly but completely with glue.
6. Put the patch on the damaged area and press down firmly.
7. Allow 12 hours for repair to dry. After patch has dried, apply glue around the edges for a
complete seal (dry 4 hours).
Limited Warranty Card
We warrant all components contained in this Laminated PVC Boat/Kayak/Stand
up Paddle Board.,etc against defects in materials and workmanship under normal
use and service, for a period of 365days from the date of purchase for the original
owner only.
If any of the components have been consumer-replaced, damaged, or misused,
the corresponding warranty on those components is invalidated. In this situation,
you will be advised of the cost of replacement parts and processing instructions.
If a verifiable manufacturing defect is found during the relevant time period, we
agree to repair or replace at its option any product under warranty provided
proper proof of purchase is presented.
This limited warranty is not valid if the product is used for commercial purposes,
or if the damage is caused by an accident, an act of God, consumer misuse,
neglect or abuse, vandalism, improper use of chemicals, exposure to extreme
weather conditions or negligence during product set up or disassembly.
We cannot be held responsible for the cost of installation, labor, or transportation
expenses incurred due to the replacement of defective parts. This limited
warranty, furthermore, does not cover any unauthorized alterations to the product.
In order to submit a claim, kindly please fill in all the parts of this form and send
it by email or fax, attaching a copy of the receipt, the description of the problem
and two photographs (as explained below, see the step #4). Jilong® is not
responsible for any expenditure on the purchase of chemical products, wasted
water, neither any consequences of water leakage. The warranty is not valid
when defects are not caused by the producer.
STEP #3
Problem:
Air Leakage Sewing / joint defect Puncture / Leakage Components Missing
Other: …………………………………………………………………………………………………………………
…………………………………………………………………............................................................................
Please describe the problem in details:
…………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………....
…………………………………………………………………………………………………………………………
STEP #1
STEP #4 – Photos
STEP #2
a) One detailed photo of the problem
b) One general photo of the set (for example: the pool with its surrounding)
DATE: / /
Please find out and tick the product from the following list:
Surname
Name
Address
Postal Code
Country
Telephone
Mobile phone
Fax
Retailer
Purchasing date
Pathfinder II – 1 person
JL007204
Cheyenne III 200
JL007111N
Z-Ray I 200
JL007012N
Pathfinder II – 2 person
JL007205
Cheyenne III 300
JL007112N
Z-Ray I 300
JL007012-1N
Pathfinder – 1 person
JL000262N
Cheyenne III 400
JL007108N
Z-Ray II 300
JL007013N
Pathfinder – 2 person
JL000262-1N
Cheyenne V 200
JL007109N
Z-Ray II 400
JL007013-1N
FISHMAN II 400
JL007211N
Cheyenne V 300
JL007101N
Z-Ray II 500
JL007013-2N
FISHMAN II 500
JL007212N
SUP Board – Native 300
Z-Ray II 700
JL007200N
Z-Ray IV 200
JL007015N
Z-Ray III 300
JL007014N
Z-Ray III 500
JL007014-2N
Z-Ray IV 300
JL007015-1N
Z-Ray III 400
JL007014-1N
Z-Ray III 700
JL007201N
