48
6. Familiar trouble about the transmission box and the way of the elimination
Position
Trouble
Reason
The eliminating the trouble
Leakage
1.There is too much oil
2.The oil seal is worn or damaged
The crank shaft box rives
1.Empty the spare oil
2.Replace the oil seal
Replace the crank shaft box
Alternator/
Starting
clutch
The engine does not
work
1.
The starting clutch which is one way is damaged
2.
The engine idler is damaged
3.
The starting system is damaged
1.
Replace or examine and repair
the starting clutch which is one way
2.
Replace the gear
3.
Examine and repair
The engine motor
rotates slowly
1. The proportion of the electrolyte is low
2. The cable of the battery is not joined correctly
3. The cable of the motor is not joined correctly
4. The engine motor is bad
1. Replenish the electrolyte
2. Rejoin the cable
3. Joining well
4. Examine and repair the motor
Electric
motor
The engine motor
rotates
,
but the engine
does not rotate
1. The starter motor reverses
——
The crank shaft case is installed wrong
——
The wires are joined incorrectly
2. The clutch set has breakdown
3. The engine gear driven or the idler is damaged
1.
——
Reinstalling
——
Rejoining
2.Examine and repair
3.Replace the gear
Summary of Contents for QM50QT-6
