Barossa SRS2 Freestanding
2
Barossa SRS2 Freestanding
11
Troubleshooting
(Continued)
Read and follow these instructions carefully before installing and
using this appliance
SAVE THESE INSTRUCTIONS
PAGE INTENTIONALLY BLANK
WARNING
!
WARNING
!
Safety Warnings
•
A flue fire with resulting damage may occur if the appliance is not installed,
operated and maintained as per this booklet.
•
Never place combustible materials such as wood, paper or furniture near the
appliance.
•
This appliance is designed to burn dry wood. Do not burn rubbish, driftwood,
flammable liquids or any substance containing salts or corrosives.
•
This appliance must not be installed and operated in an area where kerosene,
petrol, paint thinner or other flammable liquid is used or stored.
•
The flue system must be inspected and cleaned annually or sooner if required.
Failure to do so could result in an excessive buildup of creosote which may
result in a flue fire which may damage the flue or cause damage to your home.
•
The surface of the appliance becomes hot during operation. Do not touch the
surface of this appliance. Keep children away from this appliance during
operation. Do not allow anyone to operate this appliance who is not familiar
with this instruction booklet.
WARNING
!
Paint Curing and Care
Your heater is coated with the best available heat resistant paint. Even though
the paint has been baked after application, it may require further temperature
curing. It may, if you overfire the heater on its first fire, discolour. For your first
two or three firings, never exceed medium air setting and always have the fan
on when above low burn. Do not wipe the heater while the paint is curing. After
the paint has cured the only maintenance required to maintain the heaters finish
is to wipe it with a soft cloth. Do not use any commercial cleaners or solvents on
the paint finish.
We are proud of the presentation of our products. If at any time you need to
freshen up the paint, your local dealer has touchup paint available for purchase.
You may even change the colour of your heater if you wish.
If you have any enquiries, please contact the dealer from whom you purchased your heater:
PLEASE COMPLETE:
Dealer Name
Dealer Address
Phone:
Please attach your original purchase dockets to this booklet for future reference.
