background image

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 

conditions: (1) this device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation. 

Any changes or modifications not expressly approved by the party responsible for compliance 

could void the user's authority to operate the equipment. 

NOTE: This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures: 

-- Reorient or relocate the receiving antenna. 

-- Increase the separation between the equipment and receiver. 

-- Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected. 

-- Consult the dealer or an experienced radio/TV technician for help.   
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be 
installed and operated with minimum distance between 20cm the radiator your body: Use 

only the supplied antenna. 

 

Warning: Changes or modifications to this unit not expressly approved by the part responsible for 

compliance could void the user’s authority to operate the equipment 

 

2. Any Changes or modifcations not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment

 

WARRANTY CARD 

User name: 

Telephone: 

Purchase date: 

Model: 

Serial NO.: 

Summary of Contents for NIIMBOT B21
















Reviews: