background image

 

Warning 

 

Thank you for purchasing UNISKY Smart Bike Trainer. Please read the User Manual carefully, especially the safety 
instructions, prior to initial use, and only use the indoor bike trainer as described in this User Manual. Non-
compliance with the instructions may result in serious injury. The User Manual is an integral component of the 
indoor bike trainer. Please keep the User Manual in a safe place for future reference. Should you pass the indoor 
bike trainer on to another user, please be sure to include the User Manual. 

 

Please replace and use our special quick release for the rear wheel of the bike before use, and carefully check 

whether all parts in the package are complete. 

  Before use, please confirm that the product has been placed on firm ground, and the four-foot pads on the feet 

touch the ground at the same time, to ensure that the product is stable and does not shake. 

  Before starting the training, please make sure you are in good health. It is recommended that you consult your 

doctor to know whether you can do Cycling. 

  If you feel unwell during use (such as physical tiredness, weakness, pain, chest tightness, discomfort, or 

abnormal pulse beat), please stop using immediately and take a rest. If you continue to feel unwell, you are 
recommended to see a doctor immediately. 

  Without supervision or guidance, people with physical, sensory, or mental disabilities (including children) or 

who lack relevant experience or knowledge shall not use this product. 

  Do not allow children to use this product as a toy without supervision to avoid danger or injury. 

  Please pay attention to whether your clothes are too long, to avoid clothes or accessories on clothes affecting 

cycling and avoid danger. 

  When using this product, please keep enough space around to ensure that there are no obstacles, children, pets 

or any potentially dangerous articles (furniture, tables, and chairs, etc.) around, to avoid accidents due to inadvertent 
contact with the moving parts on the bike and bike trainer. 

  Please be careful when using this product while standing up. Do not stand and shake the bike to avoid falling or 

damaging the bike. 

  Please do not disassemble or convert this product by yourself. 

  Please use the original spare parts. If there is any problem with this product, please contact the authorized dealer 

of UNISKY.

 

 
 

 

 

Summary of Contents for TY-DJS003


















Reviews: