Signal/Noise
：
：
：
：
90dB
Function:
Level
/
volume control–crossover frequency control–automatic control–phase control-low
gain control.
Input terminals
：
Line level
，
high level
/
speaker level.
Output terminals:
Line level
，
high level
/
speaker level.
Low pass filter
：
Active second order, variable crossover point.
High pass filter
：
Passive first order, variable crossover point.
AMPLIFIER DIAGRAM
AMPLIFIER’S UTILIZATION AND SETUP
1.
Volume level control:
Before power up, you must assure that the
volume level control is set in the lowest position, after
starting; you can adjust the volume level control until you are satisfied with the volume.
2.
Crossover frequency control
：
The variable crossover frequency allows you to set the crossover point of the subwoofer anywhere
between 40-160Hz. Increasing the crossover frequency will allow more mid-low output from the
subwoofer and decreasing the crossover frequency will allow less mid-low output from subwoofer.
2
