background image

TFT LCD Monitor : TU17VR  1/ 13 

Issued Date : 

Dec 23, 2002 

TO : 

Jinyoung Contech Co., Ltd. 

42-5 DAEWON B/D, JAMWON-DONG, SEOCHO-KU, SEOUL, KOREA 

TEL : 82-2-517-0728        FAX : 82-2-3442-5029 

HOME PAGE : 

http://www.jyct.com/

 

Page : 

     13pages 

TFT LCD MONITOR 17” 

USER’S MANUAL   

TU17VR 

- With Touch Screen (Optional) 

 

 

1.  Introduction 

 

With an LCD Panel Monitor using a TFT Color LCD, you can use TU17VR a substitution of general PC 

Monitor because it can receive the R.G.B input of PC VGA Signal. TU17VR has OSD Function in order to 

display the best quality of the screen according to VGA Cards’ features. Besides, DVI, NTSC/PAL, S-Video 

Signals are available by option,  and Touch Screen is also available by customer’s request, it can be usable 

simultaneously with PS/2 Mouse 

 

Safety Precautions 

 

The safety recommendations outlined in this section are to be read, understood and followed before 

operating the product. Keep this information in a safe place for future reference. Failure to comply with any of 

the following safety procedures could result in serious hazard. 

 

  A. Do not operate product for any purposes other than its intended use. 

  B. This product is intended for indoor use only. 

  C. Do not operate product if power cord is damaged in any way. 

  D. Do not insert object into openings. 

  E. Do not immerse product in water or permit liquids to spill inside. 

F. Turn off power when attended or not in use unplug product before moving it or when it is not   

  in use for an extended period of time. 

   
 

Note : These specifications are subject to change for up-date without notification 

 

 

Summary of Contents for TU17VR














Reviews: