TFT LCD Monitor : VX1500 6/8
3.4 OSD utility
OSD Display Time Adjust Item
Adjust OSD display time.
OSD H-Position Adjust Item
Move the OSD menu horizontally.
OSD Adjust Item
OSD V-Position Adjust Item
Move the OSD menu vertically.
User Value Initial Item
Reset user’s value
Image Sharpness
Adjust Item
Adjust sharpness of the image.
DOS Mode Select Item
Adjust Dos screen resolution to 640 x 400 or 720 x 400
Menu Exit Item
OSD Exit
3.5 Warning Message
No Cable
In case of not connected PC VGA Cable with A/D Controller, the
message “No Cable ” is displayed.
No signal
If there is no PC VGA Signal(R,G,B H-SYNC, V-SYNC), the
message “No Signal ” is displayed.
Out of Range
In case of detecting the mode (resolution) that cannot be totally
supported by LCD.
In order to remove the phenomenon, it should be adjusted into the
mode (resolution) that can be supported by LCD.
4. Dimensions
Introduction