Jinyuan Lighting Ec Installation Instructions Manual Download

Page: 2 / 21

Jinyuan Lighting

www.jinyuanlighting.com

Content

、

Introduction

--------------------------------------------------------------------------------------------------------3

、

Disclaimer

--------------------------------------------------------------------------------------------------3

、

General Safety Rules

------------------------------------------------------------------------------------------------3

3.1 Safety Cautions--------------------------------------------------------------------------------------4

、

Transportation,Storage and Handling

--------------------------------------------------------------------------5

、

Product Identification Info

---------------------------------------------------------------------------------6

、

Installation Conditions

---------------------------------------------------------------------------------------------7

、

Mechanical Installation

---------------------------------------------------------------------------------------------8

7.1 General Installation Rules-------------------------------------------------------------------------------------8

7.2 Selection of Installation Direction and Tilt Angle---------------------------------------------------------9

7.3 Selection of the Bracket----------------------------------------------------------------------------------10

7.4 Ground Installation -------------------------------------------------------------------------------------10

7.5 Roof Installation-----------------------------------------------------------------------------------------10

7.6 Installation Method------------------------------------------------------------------------------------------11

7.6.1 Installation Method and Position------------------------------------------------------------------11

7.6.2 Installation Details-------------------------------------------------------------------------------------13

、

Electrical Installation

-----------------------------------------------------------------------------------------------15

8.1 General Installation Rules-----------------------------------------------------------------------------------15

8.2 Grid-connected Electrical System-------------------------------------------------------------------------17

8.3 Equipotential Connection-----------------------------------------------------------------------------------17

、

Debugging and Maintenance-

----------------------------------------------------------------------19

1 0

、

E l e c tr i c a l P ar a m e t e r s

- -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 0

Summary of Contents for Ec






















Search results

Summary of Contents for Ec

Reviews:

Related manuals for Ec

Brands by name

Popular brands

Jinyuan Lighting Ec, Installation Instructions Manual

Search results

Summary of Contents for Ec

Reviews:

Related manuals for Ec

Brands by name

Popular brands