Jinyuan Lighting
5
When load connected, do not disassemble the modules, disassemble or move the labels or
components on the modules. Do not mark the modules with sharp objects. Do not paint or paste on
the surface of the modules.
Make sure not to wipe the front and back side of the modules with sharp objects, neither scrape
nor strike the modules to avoid module damage. Make sure not to install or use cracked or damaged
modules to avoid fire disaster, electric shock and personal injury. Keep the children away from the
PV module system under handling, mechanical or electrical installation.
4. Transportation, Storage and Handling
Jinyuan modules are packed with Jinyuan cartons for transportation, and the modules should
be stored in the original carton before installation. Please keep the packages from damage. Do not
drop the modules which are packed in pallet. When piling the modules, please choose a flat
table-board, and do not exceed the ceiling limit which is printed on the carton. Before opening the
carton, please keep the package at a lucifugal, dry and flat place. If the modules need to be stored
before installation, please do not open the package. The package should be stored somewhere
lucifugal, draughty and away from exposure. If the modules need to be taken out of the package for
temporary storage, then they should be put on the dry and draughty pallet, and make sure the glass
side of the modules are downwards(the glass side of the bottom module should be upwards), with
maximum quantity of 30 pieces on each pallet.
When taking the modules out of the package, follow the unboxing instruction on the box.
Remove the straps and package cover, and take out the modules one piece at one time. Pay
attention to avoid the remaining modules dumped on one side during this process.
The modules are with certain weight, so do hold the frame carefully and handle with care. When
handling, please do not wear any accessory such as watch or ring to avoid scratching the modules.
Don’t jolt or crash the modules during handling or installing. Don’t put down the modules violently. It
is forbidden to pick up the modules by grabbing the junction box or the cables under any
circumstance. Don’t stand or walk on the modules. Don’t drop one module onto another one. Don’t
