PAGE 42 of 53
7.9.1. Correct Link Configuration
Proper link configuration and setup is necessary to achieve optimal scanner
performance. Ensure the following points are implemented:
1.
Do not connect a link of any size directly to another link
(Fig. 102)
.
2.
Alternate wheel links and links ensuring links are always separated by a wheel
link
(Fig. 103)
.
3.
When the number of wheel links required
(according to the chain configuration chart)
is more than the required links, connect the additional wheel links to the latch end
of the chain configuration
(Fig. 104)
.
4.
A wheel link is not required when connecting the scanner’s link mount
(Fig. 29-L)
to
the chain configuration
(Fig. 105)
.
x
Fig. 102
- Incorrect link connection
Fig. 103
- Alternate wheel links and links
Fig. 104
- Connect wheel links to latch
Fig. 105
- No wheel link between scanner and link