PAGE 91 of 177
CX0344 Rev 05.3
12.
Plug the opposite end
of the 3-axis encoder
cable into the power
controller’s encoder
receptacle
(Fig. 215)
.
13.
Connect the 3-axis
encoder cable into
the user’s instrument
(see “3-Axis Nozzle
Scanning” on page
58)
14.
Using the cable clips,
route the encoder
cable from the slider
pps to the 3-axis
encoder cable
(Fig. 216)
.
15.
Using the cable clips,
route the encoder
cable from the probe
holder to the 3-axis
encoder cable
(Fig. 216)
.
16.
Plug the encoder
Fig. 215 - Plug 3-axis encoder cable into the power controller
Fig. 216 - Connect encoder cables to 3-axis encoder cable