PAGE 97 of 177
CX0344 Rev 05.3
2.
Loosen the probe holder adjustment knob to attach the encoded skew
vertical probe holder to the slider pps slider
(Fig. 226)
.
3.
Loosen the knob to position the probe holder horizontally along the slider
pps slider
(Fig. 227)
. Tighten the probe holder adjustment knob when
positioning is complete.
To mount a UT wedge in the probe holder, follow these steps:
4.
Loosen the two probe holder arm adjustment knobs and move the arms apart
to create space for the probe
(Fig. 228)
.
5.
Align the probe to be used with the centre of yoke pivot
(Fig. 229)
.
Fig. 226 - Mount to slider pps
Fig. 227 - Mount to slider pps
Fig. 228 - Loosen knobs and move arms
Fig. 229 - Align probe
