PAGE 112 of 177
5.
Loosen the rear rotational adjustment knob to lower the front frame bar of
the low profile frame towards the inspection surface
(Fig. 262)
. Ensure gap
B
(Fig. 263)
is no smaller than gap
A
(Fig. 262)
.
6.
Loosen the front rotational adjustment knob
(Fig. 263)
to align the frame bar
parallel with the scan surface
(Fig. 264)
.
A
Fig. 262 - Set rear rotational adjustment knob
B
Fig. 263 - Align probe holder tangent with scan surface
