PAGE 127 of 177
CX0344 Rev 05.3
Chapter 6
OPERATION
6.1. System Startup
To activate the system, follow these steps:
1.
Plug-in the power controller to the appropriate power source
(see “Power
Requirements” on page 8)
.
2.
Connect the components
(see “Configurations” on page 46)
3.
Locate the
1
red emergency stop push-button on the power controller. Rotate
this button clockwise to unlatch
(Fig. 297)
.
4.
The
2
green push-button on the power controller activates the system
(Fig. 297)
.
2
1
Fig. 297 - Power controller
Fig. 298 - Handheld controller
Ok
SEVERE INJURY OR DEATH
HAZARD. READ AND
UNDERSTAND USER MANUAL
AND HEED ALL WARNINGS.
*** DANGER ***